|
|
Assemblies &
Dimensions
 |
 |
Classic
Turnbuckle with Eye Post Assembly |
| Part
# |
Rope
Size |
A |
B |
C |
D |
E |
Take-Up |
|
| |
CE-418-ST |
3/16" |
3/8" |
1/2" |
6-3/8" |
1/4"-28 |
15/64" |
2-1/8" |
|
| |
CE-425-ST |
1/4" |
7/16" |
5/8" |
7-1/4" |
5/16"-24 |
15/64" |
2-1/8" |
|
This
tensioning fitting can be used for stairways
and longer, straight runs of cable where
take-up is required to obtain proper
tension (see below). The turnbuckle will
self-adjust for stairs or angled runs.
An Eye Post Assembly is included.
Combine the classic turnbuckle with
the following fittings based on the length
of run:
0-25 feet: Combine with the Fixed Stud
26-75 feet: Combine with the Turnbuckle
Stud
Over 75 feet: Combine with another Classic
Turnbuckle |

|
 |
Fixed
Eye with Threaded Tab Assembly |
| Part
# |
Rope
Size |
A |
B |
C |
D |
E |
|
|
| |
CE-218-THD |
3/16" |
3/8" |
1/2" |
2-7/16" |
1/4"-28 |
15/64" |
|
|
| |
CE-225-THD |
1/4" |
7/16" |
5/8" |
3" |
5/16"-24 |
15/64" |
|
|
This
non-tensioning fitting is used for
stairways and angled runs. A Threaded
Tab is included with this Eye Fitting
Assembly.
Posts must be drilled and tapped
to incorporate the threaded tab.
This fitting can only be used when
a minimum wall thickness of .250
is maintained. The hole must be drilled
with an offset of 1/4" to maintain
axial alignment for the threaded
tab. |

|
 |
Fixed
Eye with Eye Post Assembly |
| Part
# |
Rope
Size |
A |
B |
C |
D |
E |
|
|
| |
CE-218-FT |
3/16" |
3/8" |
1/2" |
2-7/16" |
1/4"-28 |
15/64" |
|
|
| |
CE-225-FT |
1/4" |
7/16" |
5/8" |
3" |
5/16"-24 |
15/64" |
|
|
This
non-tensioning fitting is used for
stairways and angled runs. An Eye Post
Assembly is included with this Eye
Fitting Assembly. The hole must be
drilled with an offset of 1/4" to maintain
axial alignment for the fixed tab. |

|
 |
Turnbuckle
Stud Assembly |
| Part
# |
Rope
Size |
A |
B |
C |
Take-Up |
|
|
|
| |
CE-418-ANG |
3/16" |
11/16" |
1/2" |
3-7/16" |
1-1/2" |
|
|
|
| |
CE-425-ANG |
1/4" |
13/16" |
5/8" |
3-13/16" |
1-1/2" |
|
|
|
This
tensioning fitting is used for stairways
with runs of moderate length. For a
clean look, the fitting is assembled
inside the post. For assemblies with
wooden posts, fender washers are necessary.
(See "Replacement Parts".)
Combine the classic turnbuckle with
the following fittings based on the
length of run:
0-25 feet: Combine with the Fixed Stud
26-75 feet: Combine with the Turnbuckle
Stud
Over 75 feet: Combine with another
Classic Turnbuckle |

|
 |
Turnbuckle
Stud Assembly |
| Part
# |
Rope
Size |
A |
B |
C |
Take-Up |
|
|
|
| |
CE-418 |
3/16" |
11/16" |
3-7/16" |
7/16" |
1-1/2" |
|
|
|
| |
CE-425 |
1/4" |
13/16" |
3-13/16" |
9/16" |
1-1/2" |
|
|
|
This
tensioning fitting is used straight
runs of moderate length. For a clean
look, the fitting is assembled inside
the post. For assemblies with wooden
posts, fender washers are necessary.
(See "Replacement
Parts".)
Combine the classic turnbuckle with
the following fittings based on the
length of run:
0-25 feet:
Combine with the Fixed Stud
26-75 feet:
Combine with the Turnbuckle
Stud
Over 75 feet:
Combine with another Classic
Turnbuckle |

|
 |
Fixed
Stud Assembly |
| Part
# |
Rope
Size |
A |
B |
C |
|
|
|
|
| |
CE-318 |
3/16" |
11/16" |
2-3/16" |
7/16" |
|
|
|
|
| |
CE-325 |
1/4" |
13/16" |
3" |
9/16" |
|
|
|
|
This
non-tensioning fitting is used straight
runs. For assemblies with wooden
posts, fender washers are necessary.
(See "Replacement Parts".) |

|
 |
Classic
Turnbuckle for Cement Posts |
| Part
# |
Rope
Size |
A |
B |
C |
D |
Take-Up |
|
|
| |
CE-418-CEM |
3/16" |
5/8" |
3-7/16" |
1-1/2" |
1/2"-13 |
2-1/8" |
|
|
| |
CE-425-CEM |
1/4" |
7/8" |
3-13/16" |
1-1/2" |
1/2"-13 |
2-1/8" |
|
|
This
tensioning fitting is used to obtain
a more substantial architectural look
or for longer, straight runs of cable
where a lot of take-up is required
for proper tension (see below). This
fitting is threaded into cement posts
with a drop-in anchor system.
Combine the classic turnbuckle with
the following fittings based on the
length of run:
0-25 feet:
Combine with the Fixed Stud
26-75 feet:
Combine with the Turnbuckle
Stud
Over 75 feet:
Combine with another
Classic Turnbuckle |
|

|
|
 |
|